admin

Cisco CCDP 300-360 Practice Exam Questions,300-360 pdf | 100% Free

admin February 22, 2019

Latest updates Cisco CCDP Designing Cisco Wireless Enterprise Networks (WIDESIGN v1.1) 300-360 exam questions and Answers! Free sharing 300-360 pdf online download, online exam Practice test, easy to improve skills!
Get the full 300-360 exam dumps: https://www.leads4pass.com/300-360.html (Total questions:168 Q&A). Year-round updates! guarantee the first attempt to pass the exam!

[PDF] Free Cisco 300-360 pdf dumps download from Google Drive: https://drive.google.com/open?id=1xefPYNR7bwOF8GNFdBisfgiH5t6_wNan

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

300-360 WIDESIGN – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/widesign.html

Latest effective Cisco 300-360 Exam Practice Tests

QUESTION 1
Refer to the exhibit. An engineer has determined that Cisco 7925 phones are roaming between 2.4 6Hz and 5 6Hz
radios on the same access points, which results in poor audio performance Which action must the engineer take to
mitigate this issue?
A. Enable TPCv2 to normalize the RF environment.
B. Configure EDCA parameters for Voice Optimized.
C. Configure the Cisco 7925 phone to only use 5 6Hz.
D. Enable Band Select on the WLAN
Correct Answer: B

QUESTION 2
A Cisco 7925 phone at a client\\’s location is not registering with CUCM. The engineer analyzes a packet capture, sees
that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of
messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Correct Answer: D

QUESTION 3
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose
two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe
installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if
they have any problems.
E. Test all the customer\\’s wireless devices and applications to ensure they are working properly.
Correct Answer: BE

QUESTION 4
A customer is preparing to deploy a wireless network in a stadium and is identifying coverage area requirement for the
patrons in suite areas. Which two attributes are relevant to determining these coverage requirements? (Choose two.)
A. hours d operon
B. encryption type
C. authentication type
D. number of uses
E. device types
Correct Answer: CE

QUESTION 5
An engineer is assigned to assist a customer by estimating the number of access points needed to provide voice-grade
wireless coverage in a carpeted office space. How many access points should be estimated to cover this space of
roughly 38,000 square feet?
A. 17
B. 10
C. 6
D. 13
Correct Answer: D

QUESTION 6
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna
AP for carpeted spaces and one model external antenna AP, with high gain antennas for industrial, maintenance, or
storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey
devices and surveys several APs. Which option is the best to reduce the negative impact of the design?
A. Deploy the specified access points per area type.
B. Resurvey and adjust the design.
C. Increase the Tx power on incorrectly surveyed access points.
D. Deploy unsurveyed access points to the design.
Correct Answer: B

QUESTION 7
An engineer is preparing for an active site survey of a hospital and is informed that he or she should not enter any active
surgery suites. Which option describes how the engineer should address this restriction?
A. Conduct a passive wireless survey in the restricted areas.
B. Use the predictive AP placement tool on the wireless controller
C. Skip the area and estimate where to place the access points.
D. Arrange to perform survey activities after hours.
Correct Answer: A
Passive Survey
Passive surveys are surveys that are performed with a listen-only mode. The survey client never associates to the
access point (AP). Such surveys can be helpful when you look for rogue devices or you want a good gauge of downlink
RF
coverage from the infrastructure devices.
These can be accomplished with a passive survey:

QUESTION 8
An engineer is implementing Q0S for a new wireless voice network. Which two considerations should be identified first?
(Choose two.)
A. QoS marking
B. policing
C. QoS requirements
D. data traffic usage
E. traffic classification
Correct Answer: CE

QUESTION 9
A customer has deployed an N+N redundant wireless infrastructure. In this deployment, the access points have been
salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility
tunnels for voice clients?
A. mobility anchor
B. KIS based CAC
C. media session snooping
D. re-anchor roamed voice clients
Correct Answer: D

QUESTION 10
An engineer is determining powering requirements for a P2P wireless link using Cisco Aironet 1572EC access points.
Which power method is valid for the access point?
A. 802.3af Power over Ethernet
B. Power over Cable
C. Cisco Inline Power
D. 802.3at Power over Ethernet
Correct Answer: B

QUESTION 11
An engineer receives a digital image scanned from the floor plans of a facility to be surveyed for wireless survey and
imported it into Air Magnet Pro. However, the document contains no scale. Which action can the engineer take to most
accurately calibrate the size of the floor plan in Air Magnet?
A. Mark the length of a hallway, then count the ceiling tiles, multiply that number by 2 and enter that value.
B. Zoom in and mark across a hallway, then count the floor tiles across that hallway and enter that value.
C. Zoom in and mark a doorway, then size it at 3 feet because most doorways are 36 inches.
D. Mark the entire longest dimension of the floorplan, then use Google Earth to measure the correspondingoutside
dimension and enter that value.
Correct Answer: D

QUESTION 12
A wireless engineer is hired to troubleshoot wireless network issues and discovers that the customer is using 802 11 ac
access points with 80 MHz-wide channels in a high-density environment. Which solution addresses these issues?
A. Disable RRM on the WLC.
B. Disable TPC on the WLC
C. Decrease the channel width.
D. Increase the minimum data rate supported
Correct Answer: D

QUESTION 13
When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass
walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to
represent the impact the glass wall will have on the RF signal in the facility?
A. heavy door
B. thick wall
C. glass
D. light wall
Correct Answer: D

QUESTION 14
IEEE 802.llk-2008 is an amendment to IEEE 80211-2007 standard for radio resource management. A wireless engineer
is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer
enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?
A. 802.1 1r
B. 802.1 1w
C. 802.1 1i
D. 802.1 1k
Correct Answer: D
You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending
an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client
association/re-association, the same neighbor list optimization applies on the non- 802.11k client to generate and store
the neighbor list in the mobile station software data structure. Clients at different locations have different lists because
the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any
association or re-association. This list is created with the most updated probe data and predicts the next AP that the
client is likely to roam to. https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-
Guide/Enter prise_Mobility_8-1_Deployment_Guide/Chapter-11.html

QUESTION 15
An engineer is assigned to replace an older data-grade autonomous wireless network with a Cisco controllerbased
wireless network to meet Voice over WLAN needs. The customer also wants all existing cable infrastructure to be
reused and
no new cable be specified.
How should the engineer respond to the customer\\’s requirements?
A. Implement the wireless network with the restraints and decrease the TPC neighbor threshold to increase Txpower to
provide overlapping cell coverage at sufficient SNR to provide for Voice over WLAN service.
B. Implement the wireless network with the restraints and utilize high-gain antenna to provide overlapping cellcoverage
at sufficient SNR to provide for Voice over WLAN service.
C. Inform the customer that the network will not likely function as desired and a post install survey with thepossibility of
some new cable would be recommended.
D. Inform the customer that it is not possible to provide coverage and quality for Voice over WLAN usingexisting AP
locations and an entire overbuild will be necessary.
Correct Answer: C

QUESTION 16
When designing a WLAN, AP placement is important. Which option describes how to rank the density of APs needed to
support location services versus data and voice services?
A. Data services have the lowest density of APs compared to location services, which has the highest density.
B. Data services have a lower density of APs compared to location services, but more than voice.
C. Voice services have the highest density of APs over location and data services.
D. Voice and data services require a higher density of APs than location services.
Correct Answer: A

QUESTION 17
You have a customer that is building a new campus of four 3-story buildings that you have just completed the site
survey for. The customer is interested in the mount of rack space they will need to allocate in either the building MDF or
in the
data center for controllers. Each building is going to require 75 APs to support voice and data.
How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the
easiest management?
A. Use the centralized deployment method in the data center with the N + N redundancy method.
B. Use the centralized deployment method in the data center with the N + 1 redundancy method
C. Use the centralized deployment method in the data center with the 1 + 1 redundancy method and clientSSO.
D. Use the distributed deployment method in each building MDF with the N + 1 redundancy method.
E. Use the distributed deployment method in each building MDF with the N + N + 1 redundancy method.
F. Use the distributed deployment method in each building MDF with the N + N redundancy method.
Correct Answer: B

QUESTION 18
An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location
services. Which three requirements are inputs to the design? (Choose three.)
A. access points with directional antennas
B. continuous -67 dBm coverage from one access point
C. overlapping -75 dBm coverage from three access points
D. overlapping -67 dBm coverage from two access points
E. access points in IPS mode
F. continuous -72 dBm coverage from one access point
G. access points in corners and along perimeters
Correct Answer: BCG

QUESTION 19
A customer is deploying a mesh outdoor wireless network based on FCC standards where spectrum analysis shows
significant radar energy propagating throughout the coverage area from a local weather station. Which channel must be
excluded from the access points RRM calculation to avoid network disruption due to weather radar activity?
A. 132
B. 44
C. 11
D. 36
Correct Answer: A

QUESTION 20
Which infrastructure issue needs to be verified and potentially resolved before deploying a centralized 802.11n WLAN?
A. That all the access layer switches that the 802.11n APs will connect to support 802.3af power.
B. That all the access layer switches that the 802.11n APs will connect to contain 10/100/1000 Ethernet ports.
C. The location of application and authentication servers.
D. The proposed location for the WDS server.
E. The proposed location for the WCS.
Correct Answer: B

QUESTION 21
A customer has determined that a cable run for a low-throughput RF design is not economically feasible to install. Which
two access point modes can alleviate these customer concerns? (Choose two.)
A. bridge
B. sniffer
C. Flex+Bridge
D. FlexConnect
E. local
Correct Answer: BC

QUESTION 22
When implementing video teleconferencing over a wireless network, which three attributes should be considered when
cell planning? (Choose three.)
A. latency
B. jitter
C. throughput
D. packet loss
E. client association
F. number of users on the network
Correct Answer: ABD

QUESTION 23
An engineer is tuning RRM parameters to improve client connectivity. Which channel band results in the best 802.11n
client compatibility?
A. UNII-2
B. UNII-2e
C. UNII-3
D. UNII
E. UNII-1
Correct Answer: E

QUESTION 24
An engineer has performed a post-deployment site survey and noticed that access points were installed in suboptimal
locations due to physical restrictions and obstacles. Which action must the engineer take to resolve this deployment
issue?
A. Set DCA Channel Assignment Method to freeze.
B. Set all Auto RE parameters to factory default
C. Set TPC maximum and minimum power levels.
D. Set static channels on all AP radios.
Correct Answer: C
Suspect poor coverage/not enough AP density — If AP transmit power is already at the maximum, you can enable the
lower data rates to allow clients to connect from farther away. This has a negative impact on performance, but it can
help the customer understand that additional APs might be necessary. https://
www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey -guidelines-
wlan-00.html

QUESTION 25
An access point will be partially exposed to the outdoor environment in a loading dock of a factory. How should this
access point be deployed in a cost-effective manner?
A. indoor AP with an external leaky coaxial cable
B. outdoor mesh AP utilizing the 5-GHz band
C. outdoor bridge AP pointing its antenna toward the factory
D. indoor-based AP inside a NEMA-rated enclosure
Correct Answer: B
Because mesh radio waves have very high frequency in the 5-GHz band, the radio wavelength is small; therefore, the
radio waves do not travel as far as radio waves on lower frequencies, given the same amount of power. This higher
frequency range makes the mesh ideal for unlicensed use because the radio waves do not travel far unless a high-gain
antenna is used to tightly focus the radio waves in a given direction. https://www.cisco.com/c/en/us/td/docs/wireless/
technology/mesh/7-0MR1/design/guide/MeshAP_70MR1 .html#wp1849065

QUESTION 26
Which two factors influence the density of APs in a data-only WLAN environment? (Choose two.)
A. Channel reuse and WLAN bandwidth
B. The type of controller chosen.
C. The defined coverage area and customer needs.
D. The number of clients that will roam through the facility.
E. The number of APs dedicated to voice services.
Correct Answer: AC

QUESTION 27
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design
consideration can be leveraged to address this concern?
A. Paint the access point to cover the LED from being noticeable
B. Use enclosures to hide the wireless infrastructure in the surrounding environment
C. Deploy environmentally friendly cabling components to blend into the environment.
D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
Correct Answer: C

QUESTION 28
An engineer is deploying an outdoor Mesh network. Which four major factors should be considered? (Choose four.)
A. power
B. buildings
C. traffic lights
D. satellite dishes
E. line of sight
F. network connectivity
G. power lines
H. mounting
Correct Answer: AEFH

QUESTION 29
You are planning the coverage for wireless VoIP by using Ekahau. Which signal strength does Ekahau recommend
using for VoIP?
A. -84 dBm
B. -76 dBm
C. -67 dBm
D. -53 dBm
Correct Answer: C
Each vendor has their own recommended signal strength for a given data rate or application. For instance, one vendor
may recommend designing their VoIP solution at -67 dBm (perhaps the most widely-used value for VoIP deployment if I
had to choose one), while another may say -70 dBm. In most cases the values will differ only by a couple dB.
https://www.ekahau.com/blog/2015/01/13/ekahau-site-survey-heatmap-visualizations-part-2-signal-stren gth/

QUESTION 30
Which two factors influence the density of APs in a data-only WLAN environment? (Choose two.)
A. the number of clients that will roam through the facility
B. the type of controller chosen
C. the defined coverage area and customer needs
D. the number of APs dedicated to voice services
E. channel reuse and WLAN bandwidth
Correct Answer: CE

This is the latest update released by the Cisco CCDP Designing Cisco Wireless Enterprise Networks (WIDESIGN v1.1) 300-360 exam questions and answers, and we share 30 exam questions and answers for free to help you improve your skills! You can download 300-360 pdf or watch the 300-360 YouTube video tutorial online! Get the full 300-360 exam dumps: https://www.leads4pass.com/300-360.html (Total questions:168 Q&A). Help you pass the exam quickly!

[PDF] Free Cisco 300-360 pdf dumps download from Google Drive: https://drive.google.com/open?id=1xefPYNR7bwOF8GNFdBisfgiH5t6_wNan

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

leads4pass Promo Code 12% Off

We share more practical and effective exam dumps
(Cisco,Microsoft,Oracle,Citrix,Comptia…) The latest mcsa 70-697 exam dumps help you improve your skills

[New Microsoft Exam Dumps] Useful Microsoft MCP, Microsoft Specialist 70-533 Dumps VCE Youtube Practice (Q1-Q10)

admin July 19, 2018

With the help of latest and authentic Microsoft MCP, Microsoft Specialist 70-533 dumps exam questions, you can find the best 70-533 exam preparation kit here and you will also get the 100% guarantee for passing the Microsoft exam. “Implementing Microsoft Azure Infrastructure Solutions” is the name of Microsoft MCP, Microsoft Specialist https://www.leads4pass.com/70-533.html exam dumps which covers all the knowledge points of the real Microsoft exam. You can download Microsoft MCP, Microsoft Specialist 70-533 dumps pdf training material from leads4pass and pass the Microsoft exam 70-533 in the first attempt.

Best Microsoft 70-533 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRZF9feEh5eDcwVzA

Best Microsoft 70-533 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRX0JJVFo2eEctTW8

Latest Microsoft 70-331 dumps pdf questions and answers, best Microsoft 70-331 dumps vce youtube free try. Download the best useful Microsoft MCP, Microsoft Specialist 70-533 dumps vce software online.

Useful Microsoft MCP, Microsoft Specialist 70-533 Dumps Exam Questions And Answers (1-10)

QUESTION 1
You manage two solutions in separate Azure subscriptions.
You need to ensure that the two solutions can communicate on a private network.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order
Select and Place:
70-533 dumps
Correct Answer:

Explanation:
Configure a VNet to VNet connection
There are 5 sections to plan and configure. Configure each section in the order listed below:
Note: In this procedure, we’ll walk you through connecting two virtual networks, VNet1 and VNet2. You’ll need to be comfortable with networking in order to substitute the IP address ranges that are compatible with your network design requirements. From an Azure virtual network, connecting to another Azure virtual network is the same as connecting to an on premises network via Site-to-site (S2S) VPN.
This procedure primarily uses the Management Portal, however, you must use Microsoft Azure PowerShell cmdlets to connect the VPN gateways.

QUESTION 2
Your company has a main office and several branch offices.
You create an Azure subscription and you deploy several virtual machines. The virtual machines are located in multiple subnets.
You need to provide remote access to the virtual machines to five users in each office by using a VPN connection. The remote access connections will not require a VPN device nor a public-facing IP address in order to work.
Which three actions should you perform in sequence before you download the VPN client on each computer? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
70-533 dumps
Correct Answer:

QUESTION 3
You manage an Azure virtual network environment for a company that has an office in Boston. The company plans to open a new office location in Paris.
You must replicate the Boston virtual network environment in Paris.
How should you complete the relevant Azure PowerShell commands? To answer, drag the appropriate Azure PowerShell segment to the correct location. Each Azure PowerShell segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:

Correct Answer:

QUESTION 4
HOTSPOT
You manage a web application named Contoso that is accessible from the URL http://www.contoso.com.
You need to view a live stream of log events for the web application. 70-533 dumps
How should you configure the Azure PowerShell command? To answer, select the appropriate Azure PowerShell segment from each list in the answer area.
Hot Area:

Correct Answer:

QUESTION 5
You are the Azure administrator for Contoso Ltd. You plan to use SharePoint Online to facilitate collaboration with a partner company named Fabrikam, Inc.
You have the following collaboration requirements:
You need to configure SharePoint Online.
Which configuration setting should you use? To answer, select the appropriate options in the answer area.
Hot Area:
70-533 dumps
Correct Answer:

QUESTION 6
You are the administrator for your company’s Azure environment.
A developer creates an application that needs to access resources in external systems.
The application will be deployed in the domain.
You need to use the Azure Command-Line Interface (CLI) to create a service principal.
How should you configure the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
70-533 dumps
Correct Answer:

QUESTION 7
DRAG DROP
You plan to deploy a cloud service named contosoapp. The service includes a web role named contosowebrole. The web role has an endpoint named restrictedEndpoint.
You need to allow access to restricted Endpoint only from your office machine using the IP address 145.34.67.82.
Which values should you use within the service configuration file? To answer, drag the appropriate value to the correct location in the service configuration file. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:
70-533 dumps
Correct Answer:

Explanation
Explanation/Reference:
* Rule with lower order are applied first.
* We can selectively permit or deny network traffic (in the management portal or from PowerShell) for a virtual machine input endpoint by creating rules that specify “permit” or “deny”. By default, when an endpoint is created, all traffic is permitted to the endpoint. So for that reason, it’s important to understand how to create permit/deny rules and place them in the proper order of precedence to gain granular control over the network traffic that you choose to allow to reach the virtual machine endpoint. Note that at the instant you add one or more “permit” ranges, you are denying all other ranges by default. Moving forward from the first permit range, only packets from the permitted IP range will be able to communicate with the virtual machine endpoint.

QUESTION 8
You are managing an Azure SQL Database.
You need to export the database to a BACPAC file and verify that the export completes successfully.
Which four Azure PowerShell cmdlets or scripts should you run in sequence? To answer, move the appropriate cmdlets or scripts from the list of cmdlets to the answer area and arrange them in the correct order.
Select and Place:

Correct Answer:

QUESTION 9
HOTSPOT
You manage a public-facing web application which allows authenticated users to upload and download large files. On the initial public page there is a promotional video. 70-533 dumps
You plan to give users access to the site content and promotional video.
In the table below, identify the access method that should be used for the anonymous and authenticated parts of the application. Make only one selection in each column.
Hot Area:

Correct Answer:

QUESTION 10
You manage an Azure environment that has 12 virtual machines (VMs). A set of VMs run a Web App that uses ASP.NET.
The developer of the application must have access to ASP.NET metrics and Internet Information Services (IIS) logs from the VMs.
You need to ensure that the metrics and logs are saved and provide the developer access to the data.
For each requirement, which option should you use? To answer, select the appropriate options in the answer area.
Hot Area:

Correct Answer

Best Microsoft 70-533 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRZF9feEh5eDcwVzA

Best Microsoft 70-533 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRX0JJVFo2eEctTW8

Download Microsoft MCP, Microsoft Specialist real 70-533 dumps exam questions and verified answers. Latest Microsoft MCP, Microsoft Specialist https://www.leads4pass.com/70-533.html dumps pdf training resources which are the best for clearing 70-533 test, and to get certified by Microsoft MCP, Microsoft Specialist. 100% passing guarantee and full refund in case of failure.

New Microsoft MCP, Microsoft Specialist 70-533 dumps vce youtube: https://youtu.be/m4ydO0D_bYg

[New Cisco Exam Dumps] High Quality Cisco CCDP 300-115 Dumps Exam Questions And Answers Free Shared Youtube Demo (Q1-Q20)

admin May 21, 2018

Get Cisco CCDP 300-115 dumps exam preparation questions in form of 300-115 PDF. Prepare for Cisco 300-115 exam with best Cisco CCDP 300-115 dumps pdf training resources and vce youtube demo free update. “Implementing Cisco IP Switched Networks” is the name of Cisco CCDP https://www.leads4pass.com/300-115.html exam dumps which covers all the knowledge points of the real Cisco exam. If you are looking to get Cisco Implementing Cisco IP Switched Networks certification by passing exam 300-115 then you can pass it in one go.

Google Drive Latest Cisco 300-115 Dumps PDF: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E

Google Drive Latest Cisco 300-101 Dumps PDF: https://drive.google.com/open?id=0B_7qiYkH83VRWFlVNGtTZjU1MVE
300-115 dumps

High Quality Cisco CCDP 300-115 Dumps Exam Questions And Answers (1-20)

QUESTION 1
Drag Drop
Select and Place:
300-115 dumps
Correct Answer:

QUESTION 2
Drag Drop
Select and Place:

Correct Answer:

QUESTION 3
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 4
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 5
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 6
Drag and Drop
Drag the attributes on the left to the types of VLAN designs that they describe on the right.
Select and Place:
300-115 dumps
Correct Answer:

QUESTION 7
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 8
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 9
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 10
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 11
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 12
Drag and Drop
Match the HSRP states on the left with the correct definition on the right. 300-115 dumps
Select and Place:

Correct Answer:

QUESTION 13
Drag and Drop
Select and Place:

Correct Answer:

QUESTION 14
Drag and Drop
PortFast / BPDU Guard / BPDU Filter.
Select and Place:

Correct Answer:

QUESTION 15
Drag and Drop
PVST+ / Rapid PVST+ / MSTP
Select and Place:
300-115 dumps
Correct Answer:

QUESTION 16
Drag and Drop
STP Timers
Select and Place:

Correct Answer:

QUESTION 17
Drag and Drop
Port Cost / Switch Port Priority / Port Priority
Select and Place:

Correct Answer:

QUESTION 18
Drag and Drop
Guard Root / Guard Loop
Select and Place:
300-115 dumps
Correct Answer:

QUESTION 19
Drag and Drop
STP Timer Delay
Select and Place:

Correct Answer:

QUESTION 20
Drag and Drop
LLDP-TLV
Select and Place:

Correct Answer:

Why Select Lead 4 pass?

leads4pass is the best provider of IT learning materials and the right choice for you to pass Cisco 300-115 exam. Other brands started earlier, but the questions are not the newest and the price is relatively expensive. leads4pass provide the latest real and cheapest questions and answers, help you pass Cisco 300-115 exam easily at first try.
300-115 dumps
What Our Customers Are Saying:

300-115 dumps

New Cisco CCDP 300-115 dumps pdf practice files and study guides free download from leads4pass. The best and most updated latest Cisco CCDP https://www.leads4pass.com/300-115.html dumps pdf training resources which are the best for clearing 300-115 exam test, and to get certified by Cisco CCDP. It is the best choice for you to pass Cisco 300-115 exam.

Useful Cisco CCDP 300-115 dumps vce youtube demo:

https://youtu.be/wyXFLuYtFpI

[New Cisco Exam Dumps] Latest Cisco CCNP Security 300-210 Dumps PDF Training Resources Update Youtube Demo

admin April 3, 2018

Latest Cisco CCNP Security 300-210 dumps pdf training resources and study guides download free try from leads4pass. Useful Cisco CCNP Security 300-210 dumps pdf files and vce youtube demo update free shared. “Implementing Cisco Threat Control Solutions (SITCS)” is the name of Cisco CCNP Security https://www.leads4pass.com/300-210.html exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco CCNP Security 300-210 dumps exam questions and answers update free try, pass Cisco 300-210 exam test easily.

The best Cisco 300-210 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRZElkNlhzd3h0elU

The best Cisco 300-175 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRMjJsWXh1NTRUb28
300-210 dumps

New Cisco CCNP Security 300-210 Dumps Exam Questions & Answers (1-30)

QUESTION 1
An engineer wants to improve web traffic performance by proxy caching. Which technology provides this improvement?
A. Firepower
B. FireSIGT
C. WSA
D. ASA
Correct Answer: C

QUESTION 2
Which cloud-based malware detection engine uses machine-learning detection techniques in the Cisco Advanced Malware Protection cloud?
A. third-party detections
B. Spero
C. Ethos
D. Memcache
Correct Answer: B

QUESTION 3
which two options are the basic parts of a Snort rule? (Choose two)
A. rule policy
B. rule header
C. Rule assignment and ports
D. rule options
E. Rule footer
Correct Answer: BD

QUESTION 4
Which three statements about Cisco CWS are true’? (Choose three )
A. It provides protection against zero-day threats.
B. Cisco SIO provides it with threat updates in near real time.
C. It supports granular application policies.
D. Its Roaming User Protection feature protects the VPN from malware and data breaches.
E. It supports local content caching.
F. Its Cognitive Threat Analytics feature uses cloud-based analysis and detection to block threats outside the network.
Correct Answer: ABC

QUESTION 5
When creating an SSL policy on Cisco FirePOWER, which three options do you have
A. do not decrypt
B. trust
C. allow
D. block with reset
E. block
F. encrypt
Correct Answer: ADE

QUESTION 6
With Cisco FirePOWER Threat Defense software, which interface mode do you configure to passively receive traffic that passes the appliance?
A. transparent
B. routed
C. passive
D. inline set
E. inline tap
Correct Answer: C

QUESTION 7
Which two statement about Cisco Firepower file and intrusion inspection under control policies are true? 300-210 dumps (Choose two.)
A. File inspection occurs before intrusion prevention.
B. Intrusion Inspection occurs after traffic is blocked by file type.
C. File and intrusion drop the same packet.
D. Blocking by file type takes precedence over malware inspection and blocking
E. File inspection occurs after file discovery
Correct Answer: AE

QUESTION 8
Which Cisco FirePOWER setting is used to reduce the number of events received in a period of time and avoid being overwhelmed?
A. thresholding
B. rate-limiting
C. limiting
D. correlation
Correct Answer: D

QUESTION 9
Which Cisco Web Security Appliance feature enables the appliance to block suspicious traffic on all of its ports and IP addresses?
A. explicit forward mode
B. Layer 4 Traffic Monitor
C. transparent mode
D. Secure Web Proxy
Correct Answer: B

QUESTION 10
300-210 dumps

What is the maximum message size that the Cisco Email Security Appliance will accept from the violet.public domain?
A. 1 KB
B. 100 KB
C. 1 MB
D. 10 MB
E. 100 MB
F. Unlimited
Correct Answer: D

QUESTION 11
Which option is a benefit of Cisco Email Security virtual appliance over the Cisco ESA appliance?
A. global threat intelligence updates from Talos
B. reduced space and power requirements
C. outbound message protection
D. automated administration
Correct Answer: B

QUESTION 12
An engineer must architect an AMP private cloud deployment. What is the benefit of running in air-gaped mode?
A. Internet connection is not required for disposition.
B. Database sync time is reduced.
C. Disposition queries are done on AMP appliances.
D. A dedicated server is needed to run amp-sync.
Correct Answer: D

QUESTION 13
Which Cisco ESA predefined sender group uses parameter-matching to reject senders?
A. WHITELIST
B. BLACKLIST
C. UNKNOWNLIST
D. SUSPECTLIST
Correct Answer: B

QUESTION 14
A network engineer wants to deploy a virtual cisco ESA and wants protection against email-based threats, email encryption, and clustering. Which software license bundle must the network engineer purchase to access these components?
A. cisco email security Premium
B. cisco email security Hybrid Essential
C. cisco email security advansed
D. cisco email security Gateway
Correct Answer: A

QUESTION 15
Which type of server is required to communicate with a third-party DLP solution?
A. an ICAP-capable proxy server
B. a PKI certificate server
C. an HTTP server
D. an HTTPS server
Correct Answer: A

QUESTION 16
Which Cisco technology is a customizable web-based alerting service designed to report threats and vulnerabilities?
A. Cisco Security Intelligence Operations
B. Cisco Security IntelliShield Alert Manager Service
C. Cisco Security Optimization Service
D. Cisco Software Application Support Service
Correct Answer: B

QUESTION 17
300-210 dumps

Which three statements about the Cisco IPS appliance configurations are true? (Choose three.)
A. The maximum number of denied attackers is set to 10000.
B. The block action duraton is set to 3600 seconds.
C. The Meta Event Generator is globally enabled.
D. Events Summarization is globally disabled.
E. Threat Rating Adjustment is globally disabled.
Correct Answer: ABC

QUESTION 18
What is the correct deployment for an IPS appliance in a network where traffic identified as threat traffic should be blocked and all traffic is blocked if the IPS fails? 300-210 dumps
A. Inline; fail open
B. Inline; fail closed
C. Promiscuous; fail open
D. Promiscuous; fail closed
Correct Answer: B

QUESTION 19
300-210 dumps

Which signature definition is virtual sensor 0 assigned to use?
A. rules0
B. vs0
C. sig0
D. ad0
E. ad1
F. sigl
Correct Answer: C

QUESTION 20
Which port is used for CLI Secure shell access?
A. Port 23
B. Port 25
C. Port 22
D. Port 443
Correct Answer: C

QUESTION 21
An ASA with an IPS module must be configured to drop traffic matching IPS signatures and block all traffic if the module fails. Which describes the correct configuration?
A. Inline Mode, Permit Traffic
B. Inline Mode, Close Traffic
C. Promiscuous Mode, Permit Traffic
D. Promiscuous Mode, Close Traffic
Correct Answer: B

QUESTION 22
Which Cisco monitoring solution displays information and important statistics for the security devices in a network?
A. Cisco Prime LAN Management
B. Cisco ASDM Version 5.2
C. Cisco Threat Defense Solution
D. Syslog Server
E. TACACS+
Correct Answer: B

QUESTION 23
Which three options are valid event actions for a Cisco IPS? (Choose three.)
A. deny-packet-inline
B. deny-attack-reset
C. produce-verbose-alert
D. log-attacker-packets
E. deny-packet-internal
F. request-block-drop-connection
Correct Answer: ACD

QUESTION 24
During initial configuration, the Cisco ASA can be configured to drop all traffic if the ASA CX SSP fails by using which command in a policy-map?
A. cxsc fail
B. cxsc fail-close
C. cxsc fail-open
D. cxssp fail-close
Correct Answer: B

QUESTION 25
Which set of commands changes the FTP client timeout when the sensor is communicating with an FTP server?
A. sensor# configure terminal
sensor(config)# service sensor
sensor(config-hos)# network-settings
sensor(config-hos-net)# ftp-timeout 500
B. sensor# configure terminal
sensor(config)# service host sensor(config-hos)# network-settings parameter ftp sensor(config-hos- net)# ftp-timeout 500
C. sensor# configure terminal
sensor(config)# service host
sensor(config-hos)# network-settings
sensor(config-hos-net)# ftp-timeout 500
D. sensor# configure terminal
sensor(config)# service network
sensor(config-hos)# network-settings
sensor(config-hos-net)# ftp-timeout 500
Correct Answer: C

QUESTION 26
300-210 dumps

What is the status of OS Identification?
A. It is only enabled to identify “Cisco IOS” OS using statically mapped OS fingerprinting
B. OS mapping information will not be used for Risk Rating calculations.
C. It is configured to enable OS mapping and ARR only for the 10.0.0.0/24 network.
D. It is enabled for passive OS fingerprinting for all networks.
Correct Answer: D

QUESTION 27
Which three zones are used for anomaly detection? (Choose three.)
A. Internal zone
B. External zone
C. Illegal zone
D. Inside zone
E. Outside zone
F. DMZ zone
Correct Answer: ABC

QUESTION 28
300-210 dumps What are the initial actions that can be performed on an incoming SMTP session by the workqueue of a Cisco Email Security Appliance?
A. Accept, Reject, Relay, TCPRefuse
B. LDAP Verification, Envelope Sender Verification, Bounce Verification, Alias Table Verification
C. Recipient Access Table Verification, Host DNS Verification, Masquerading, Spam Payload Check
D. SMTP Authentication, SBRS Verification, Sendergroup matching, DNS host verification
Correct Answer: A

QUESTION 29
Which signature engine is responsible for ICMP inspection on Cisco IPS?
A. AIC Engine
B. Fixed Engine
C. Service Engine
D. Atomic IP Engine
Correct Answer: D

QUESTION 30
Refer to the exhibit.
300-210 dumps
What are two facts about the interface that you can determine from the given output? (Choose two.)
A. A Cisco Flexible NetFlow monitor is attached to the interface.
B. A quality of service policy is attached to the interface.
C. Cisco Application Visibility and Control limits throughput on the interface.
D. Feature activation array is active on the interface.
Correct Answer: AB

Why Choose lead4 pass?

High quality IT learning materials offered by the best provider leads4pass. From the following picture, you can see there is a difference between leads4pass and other brands. Other brands started earlier, but the questions are not the latest and it is very expensive. leads4pass provide the cheapest and newest questions with high pass rate.
300-210 dumps

The Following Are Some Reviews From Our Customers:

300-210 dumps

Get the best Cisco CCNP Security 300-210 dumps exam practice materials in PDF format free download from leads4pass. Helpful newest Cisco CCNP Security https://www.leads4pass.com/300-210.html dumps pdf training resources which are the best for clearing 300-210 exam test, and to get certified by Cisco CCNP Security. 100% success and guarantee to pass Cisco 300-210 exam.

Useful Cisco CCNP Security 300-210 dumps vce youtube demo:

https://youtu.be/smQmOmQulh4

[New IBM Exam Dumps] 100% Pass Latest IBM certifications II 000-741 Dumps Exam Practice Materials

admin March 20, 2018

Latest IBM certifications II 000-741 dumps exam practice materials in PDF format download free shared. New IBM certifications II 000-741 dumps pdf training resources update free try from leads4pass. “IBM High-End Disk Solutions. Version 4” is the name of IBM certifications II https://www.leads4pass.com/000-741.html exam dumps which covers all the knowledge points of the real IBM exam. Useful latest IBM certifications II 000-741 dumps exam questions and answers free download from leads4pass, 100% success and guarantee to pass IBM 000-741 exam test easily.

New IBM 000-741 dumps pdf practice materials: https://drive.google.com/open?id=1iM5GgE0EeP4_YQrR3-TX4G4t9rjmvM8S

New IBM 000-740 dumps pdf practice materials: https://drive.google.com/open?id=12TfJtheCg9wQhvPbEjwk_DHDmcNg0Pb3
000-741 dumps

Useful IBM certifications II 000-741 Dumps Exam Practice Questions And Answers (1-20)

QUESTION 1
A customer has a mixed iSeries, pSeries, Sun and Windows server environment: Three Exchange servers each with 1.8TB database Five iSeries Domino servers each with 1TB database 10TB Sun/SAP cluster 20TB of pSeries requirement Annual growth rate of 12TB per year Which solution provides them the most cost effective solution for three years?
A.A DS4500 with 300GB drives
B.A DS6800 with 300GB drives
C.A DS8100 with 300GB drives
D.An SVC with DS4100 with 250GB drives, and a DS6800 with 300GB drives
Correct Answers: C

QUESTION 2
A customer is about to install ten Microsoft Windows servers, three Sun servers, and five AIX servers, all with Fibre Channel interfaces. A reliability requirement is to have two Fibre Channel interfaces in each of the servers. Which of the following is required?
A.IBM Subsystem Device Driver
B.IBM TotalStorage SAN File System
C.IBM TotalStorage Productivity Center for Data
D.IBM TotalStorage Productivity Center for Disk
Correct Answers: A

QUESTION 3
A customer has a rapidly expanding data warehouse application installed on an MVS-attached EMC storage system. They are running out of capacity and encountering performance degradation. Before proposing that they migrate to an IBM TotalStorage DS8000 model, which report should be used to identify potential performance bottlenecks?
A.ACS
B.RMF
C.DFSMS
D.VTSSTATS
Correct Answers: B

QUESTION 4
A customer with a large number of UNIX servers has an IBM TotalStorage Enterprise Storage Server Model 800 for a 90-day trial. The ESS delivers excellent performance for most of the customer’s tests, but does not meet the customer’s expectations for a critical benchmark that heavily loads a few key volumes on one array. Which of the following changes should the storage specialist suggest to improve performance for this critical benchmark?
A.Add Parallel Access Volumes
B.Add Arrays Across Loops
C.Turn off RAID-5 sparing
D.Turn off cache and NVS
Correct Answers: B

QUESTION 5
A customer’s IT department now mandates a fast backup and restoration process be in place before an application is deployed. What would be the simplest and most effective option to satisfy this mandatory requirement?
A.Deploy PPRC
B.Implement FlashCopy
C.Install 10TB of additional disk space
D.Consolidate all server disk space with RAID-5
Correct Answers: B

QUESTION 6
A customer has an IBM TotalStorage DS6800 and an IBM TotalStorage DS8100 at their computing center. They want to install a disaster recovery site 600 kilometers from their center using a DS8300. 000-741 dumps Which of the following IBM Resiliency Family solution offerings should be implemented?
A.Metro Mirror
B.Global Copy
C.Global Mirror
D.FlashCopy
Correct Answers: C

QUESTION 7
What is the minimum number of FCP/FICON host adapters required for a IBM TotalStorage DS8000 high availability configuration?
A.2
B.4
C.8
D.16
Correct Answers: A

QUESTION 8
A customer has an installed IBM TotalStorage Enterprise Storage Server (ESS) Model 800 with 20TB of storage, 32GB cache and ESCON channels. The customer is beginning to experience throughput performance issues and has no additional ESCON channel expansion ability. To best address these performance considerations, which of the following steps should be suggested?
A.Add a second ESS to allow additional ESCON connections.
B.Convert the installed ESS from ESCON to FICON connections.
C.Increase the cache on the ESS from 32GB to 48GB.
D.Add additional eight-packs to provide more disk arms and increase performance.
Correct Answers: B

QUESTION 9
An IBM Business Partner is analyzing customer requirements for a disk subsystem. To determine that the IBM TotalStorage DS8000 can operate in the customer’s current host environment, what is the best source of information for the storage specialist to use?
A.PartnerInfo
B.PartnerLine
C.Offline Configuration Tool
D.The IBM TotalStorage Web Site
Correct Answers: D

QUESTION 10
A long-term IBM disk customer would like to compare the DS8000 product family to the Hitachi Data Systems TagmaStore. Which IBM storage products compare most favorably?
A.DS8300 and SAN Volume Controller
B.DS8000 and Tivoli Storage Manager
C.DS8000 and IBM TotalStorage 3584 Tape Library
D.DS8100 and IBM TotalStorage Productivity Center for Disk
Correct Answers: A

QUESTION 11
A customer recently implemented a data warehousing application. What disk subsystem attribute is most important for this type of application?
A.Read performance and scalability
B.Large cache capability
C.Remote copy function
D.Block and file input/output capability
Correct Answers: A

QUESTION 12
A storage specialist is proposing an IBM TotalStorage DS6800 to replace a five-year old disk system. Which of the following would provide an effective cost justification for migration to DS6800?
A.Centralized management
B.Multi-platform attach capability
C.Four year warranty
D.FlashCopy feature
Correct Answers: C

QUESTION 13
A customer has an existing IBM TotalStorage DS8100 Storage Server with 12 Megapacks of 73GB disks and 16 ESCON Adapters. How many additional FICON adapters and Megapacks can be installed in the expansion frame?
A.0 adapters and 12 Megapacks
B.4 adapters and 16 Megapacks
C.8 adapters and 4 Megapacks
D.16 adapters and 8 Megapacks
Correct Answers: A

QUESTION 14
A customer’s database application failed during a recent maintenance window. When the IBM TotalStorage DS6800 controller automatically rebooted, the database became inconsistent and failed. After the database was made consistent, the customer asked the storage specialist to recommend a method to test path failover on a test server. Which of the following would be the first step of the implementation plan?
A.Install Redundant Dual Active Controllers (RDAC)
B.Install Subsystem Device Driver (SDD)
C.Unblock the switch port
D.Monitor the database application
Correct Answers: B

QUESTION 15
A customer has recently installed an IBM TotalStorage DS8100 in their production environment.
They have 5TB of capacity assigned to an IBM eServer zSeries host and 5TB of capacity assigned to pSeries servers. The customer would like to make point-in-time copies for 2TB of zSeries storage and 2TB of pSeries storage. What is the correct licensing option to recommend?
A.2TB
B.4TB
C.5TB
D.10TB
Correct Answers: D

QUESTION 16
Which of the following is the most important action to ensure customer satisfaction when performing the implementation of an IBM SAN fabric with two IBM TotalStorage DS8300 units?
A.Develop clear objectives that map to expectations.
B.Complete a Solutions Assurance Review.
C.Ensure that power and space are available in the Data Center.
D.Get the customer to sign a completion form.
Correct Answers: A

QUESTION 17
A company acquired two other companies and is consolidating their order entry application systems into an existing common disk storage pool on a single SAN fabric. 000-741 dumps During the consolidation, half of the users of one of the order entry systems could not access their application. The users who had access experienced slow performance. What is the first action the engineer should take to determine the source of the problem?
A.Review SAN configuration, connectivity and zoning.
B.Review application parameters for contention or tuning problems.
C.Use internal disk monitoring tools to determine the problems source.
D.Call the SAN and disk vendors to perform a healthcheck on their hardware.
Correct Answers: A

QUESTION 18
A customer has an IBM Enterprise Storage Server Model 800 with 10 eight-packs formatted as Fixed Block volumes. There is not enough unused space on the RAID ranks to act as FlashCopy targets for the existing LUNs. Which of the following should the storage specialist propose to enable the customer to shorten their backup window?
A.Add FlashCopy Version 1 and use the full copy option
B.Add FlashCopy Version 2 and additional capacity
C.Add FlashCopy Version 1 and use NOCOPY option
D.Add FlashCopy Version 2 and use incremental FlashCopy
Correct Answers: B

QUESTION 19
During a review of environmental requirements before ordering an IBM z890 server and IBM TotalStorage DS8300, the customer states that the available power is 220 volts AC. Which feature should be included with the DS8300 order?
A.Low voltage
B.High Voltage
C.Remote zSeries Power Control
D.Remote force power off switch
Correct Answers: A

QUESTION 20
An IBM TotalStorage DS6800 is being shipped to the customer. Who should set up the logical configuration?
A.The IBM Field Technical Sales Specialist
B.The customer’s system administrator
C.The IBM Support Service Representative
D.The customer’s operations manager
Correct Answers: B

Why Select leads4pass?

leads4pass is the best IT learning material provider. Other brands appeared early, the questions are not the latest and it is very expensive. leads4pass provide the newest and cheapest questions and answers. leads4pass is the correct choice for IT learning materials, help you pass your exam easily.
000-741 dumps

What Our Customers Are Saying:

High quality IBM certifications II 000-741 dumps pdf practice files and study guides free download from leads4pass. The best and most updated latest IBM certifications II https://www.leads4pass.com/000-741.html dumps pdf training resources which are the best for clearing 000-741 exam test, and to get certified by IBM IBM certifications II, download one of the many PDF readers that are available for free.

[New Cisco Exam Dumps] Why Choose Cisco 300-101 Dumps Exam Best PDF Files And Youtube Demo

admin January 25, 2018

Why people choose leads4pass Cisco 300-101 dumps exam? leads4pass offers useful latest Cisco CCDP 300-101 dumps pdf training resources and study guides free download. The best and most updated Cisco CCDP 300-101 dumps pdf files and vce youtube demo free shared. “Implementing Cisco IP Routing” is the name of Cisco CCDP https://www.leads4pass.com/300-101.html exam dumps which covers all the knowledge points of the real Cisco exam. Prepare for Cisco 300-101 exam test with high quality Cisco CCDP 300-101 dumps exam practice questions and answers download free try, pass Cisco 300-101 exam quickly and easily at first attempt.

Best Cisco 300-101 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRWFlVNGtTZjU1MVE

Best Cisco 300-135 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRS21DRS14UlZHNjg
300-101 dumps

High quality Cisco CCDP 300-101 dumps exam questions and answers (1-20)

QUESTION 1
Which option is one way to mitigate symmetric routing on an active/active firewall setup for TCP-based connections?
A. performing packet captures
B. disabling asr-group commands on interfaces that are likely to receive asymetric traffic
C. replacing them with redundant routers and allowing load balancing
D. disabling stateful TCP checks
Correct Answer: D

QUESTION 2
Which option is invalid when configuring Unicast Reverse Path Forwarding?
A. allow self ping to router
B. allow default route
C. allow based on ACL match
D. source reachable via both
Correct Answer: D

QUESTION 3
Which traffic characteristic is the reason that UDP traffic that carries voice and video is assigned to the queue only on a link that is at least 768 kbps?
A. typically is not fragmented
B. typically is fragmented
C. causes windowing
D. causes excessive delays for video traffic
Correct Answer: A

QUESTION 4
Refer to the following configuration command.
router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true? 300-101 dumps
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to port 8080 or port 80.
Correct Answer: A

QUESTION 5
What type of IPv6 packet will indicate traffic from single host and single node?
A. multicast
B. unicast
C. broadcast
D. anycast
Correct Answer: B

QUESTION 6
Refer to the exhibit. Which statement about the command output is true?
300-101 dumps
A. The router exports flow information to 10.10.10.1 on UDP port 5127.
B. The router receives flow information from 10.10.10.2 on UDP port 5127.
C. The router exports flow information to 10.10.10.1 on TCP port 5127.
D. The router receives flow information from 10.10.10.2 on TCP port 5127.
Correct Answer: A

QUESTION 7
Which three IP SLA performance metrics can you use to monitor enterprise-class networks? (Choose three.)
A. Packet loss
B. Delay
C. bandwidth
D. Connectivity
E. Reliability
F. traps
Correct Answer: ABD

QUESTION 8
What is the administrative distance for EBGP?
A. 200
B. 30
C. 70
D. 20
Correct Answer: D

QUESTION 9
A network engineer is configuring the router for NetFlow data exporting. What is required in order for NDE to begin exporting data?
A. Source
B. Flow mask
C. Destination
D. Interface type
E. Traffic type
F. NetFlow version
Correct Answer: C

QUESTION 10
A network administrator creates a static route that points directly to a multi-access interface, instead of the next-hop IP address. 300-101 dumps The administrator notices that Cisco Express Forwarding ARP requests are being sent to all destinations. Which issue might this configuration create?
A. Low bandwidth usage
B. High memory usage
C. Cisco Express Forwarding routing loop
D. High bandwidth usage
E. IP route interference
Correct Answer: C

QUESTION 11
Refer to the exhibit.
300-101 dumps
The DHCP client is unable to receive a DHCP address from the DHCP server. Consider the following output:
hostname RouterB
!
interface fastethernet 0/0
ip address 172.31.1.1 255.255.255.0
interface serial 0/0
ip address 10.1.1.1 255.255.255.252
!
ip route 172.16.1.0 255.255.255.0 10.1.1.2
Which configuration is required on the Router B fastethernet 0/0 port in order to allow the DHCP client to successfully receive an IP address from the DHCP server?
A. RouterB(config-if)# ip helper-address 172.16.1.2
B. RouterB(config-if)# ip helper-address 172.16.1.1
C. RouterB(config-if)# ip helper-address 172.31.1.1
D. RouterB(config-if)# ip helper-address 255.255.255.255
Correct Answer: A

QUESTION 12
Which is the asymmetric Rotuing?
A. active/active firewall
B. active/passive firwall
C. single path
D. using VRRP
Correct Answer: A

QUESTION 13
Refer to the exhibit.
300-101 dumps
Routers R2, R3, R4, and R5 have OSPF enabled. What should be configured on the routers in area 1 to ensure that all default summary routes and redistributed EIGRP routes will be forwarded from R6 to area 1, and only a default route for all other OSPF routes will be forwarded from R5 to area 1.
A. R5(config-router)# area 1 stubR6(config-router)# area 1 stub
B. R5(config-router)# area 1 stub no-summaryR6(config-router)# area 1 stub
C. R5(config-router)# area 1 nssaR6(config-router)# area 1 nssa
D. R5(config-router)# area 1 nssa no-summaryR6(config-router)# area 1 nssa
Correct Answer: D

QUESTION 14
Which of the following NSAP addresses is a private, locally administered address?
A. 39.0f01.0002.0000.0c00.1111.00
B. 48.0f01.0002.0000.0c00.1111.00
C. 49.0004.30ac.0000.3090.c7df.00
D. 52.0f01.0002.0000.0c00.1111.00
Correct Answer: C

QUESTION 15
Which two phases of DMVPN allow to spoke sites to create dynamic tunnels to one another? (Choose Two)
A. Phase 1
B. Phase 2
C. Phase 3
D. Phase 4
E. Phase 5
Correct Answer: BC

QUESTION 16
Which two statements about 6to4 tunneling are accurate? 300-101 dumps (Choose two.)
A. Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates 6to4 tunneling.
B. Each 6to4 site receives a /48 prefix in a 6to4 tunnel.
C. 2002::/48 is the address range specifically assigned to 6to4.
D. Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4 tunneling.
E. 6to4 is a manual tunnel method.
Correct Answer: BD

QUESTION 17
Which three statements are true when configuring redistribution for OSPF? (Choose three)
A. The default metric is 10.
B. The default metric is 20.
C. The default metric type is 2.
D. The default metric type is 1.
E. Subnets do not redistribute by default.
F. Subnets redistribute by default.
Correct Answer: BCE

QUESTION 18
R3#show run | include defaultip default-network 140.140.0.0 ip default-network 130.130.0.0 R3#show ip route | begin Gateway Gateway of last resort is 0.0.0.0 to network 130.130.0.0 116.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 116.16.37.0/30 is directly connected, Serial1/0.2 C 116.16.32.0/30 is directly connected, Serial2/0.2 C 116.16.34.0/28 is directly connected, Serial1/0.1 C 116.16.35.0/28 is directly connected, Serial2/0.1 S 116.0.0.0/8 [1/0] via 116.16.34.0
* 140.140.0.0/32 is subnetted, 3 subnets O 140.140.1.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1 O 140.140.3.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1 O 140.140.2.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1
* 130.130.0.0/16 is variably subnetted, 4 subnets, 2 masks D* 130.130.0.0/16 is a summary, 00:30:04, Null0 C 130.130.1.0/24 is directly connected, Ethernet0/0 C 130.130.2.0/24 is directly connected, Ethernet0/1 C 130.130.3.0/24 is directly connected, Ethernet1/0 D 150.150.0.0/16 [90/679936] via 116.16.35.5, 00:02:58, Serial2/0.1 Refer to the exhibit. Why is the 140.140.0.0 network not used as the gateway of last resort even though it is configured first?
A. The last default-network statement will always be preferred.
B. A route to the 140.140.0.0 network does not exist in the routing table.
C. Default-network selection will always prefer the statement with the lowest IP address.
D. A router will load balance across multiple default-networks; repeatedly issuing the show ip route command would show the gateway of last resort changing between the two networks.
Correct Answer: B

QUESTION 19
Which two reason for IP SLA tracking failure are likely true (choose two)
A. The source-interface is configured incorrectly
B. The destination must be 172.30.30.2 for icmp-echo
C. A route back to the R1 LAN network is missing in R2
D. The default routehas wrong next hop IP address
E. The threshold value is wrong
Correct Answer: AC

QUESTION 20
A network engineer receives reports about poor voice quality issues at a remote site. The network engineer does a packet capture and sees out-of-order packets being delivered. Which option can cause the VOIP quality to suffer?
A. traffic over backup redundant links
B. misconfigured voice vlan
C. speed duplex link issues
D. load balancing over redundant links
Correct Answer: D

The following are some reviews from our customers:

300-101 dumps
You can click here to have a review about us: https://www.resellerratings.com/store/leads4pass

Newest helpful Cisco CCDP 300-101 dumps exam practice materials in PDF format free download from leads4pass. The best useful Cisco CCDP https://www.leads4pass.com/300-101.html dumps pdf training resources which are the best for clearing 300-101 exam test, and to get certified by Cisco CCDP, download one of the many PDF readers that are available for free, 100% success and guarantee to pass.

Why Choose leads4pass?

leads4pass is the best provider of IT learning materials and the right choice for you to prepare for the exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. leads4pass provide the latest real questions and answers with lowest prices, help you pass the exam easily at first try.
300-101 dumps

[New CompTIA Exam Dumps] Latest CompTIA A+ 220-801 Dumps Exam Practice Materials And Youtube Update

admin January 16, 2018

Which is the best materials for CompTIA A+ 220-801 exam test? Latest CompTIA A+ 220-801 dumps pdf practice materials and vce youtube demo update free shared. Newest helpful CompTIA A+ 220-801 dumps exam questions and answers free download from leads4pass. “CompTIA A+ Certification Exam” is the name of CompTIA A+ https://www.leads4pass.com/220-801.html exam dumps which covers all the knowledge points of the real CompTIA exam. The best useful CompTIA A+ 220-801 dumps pdf training resources and study guides update free try, pass CompTIA 220-801 exam test easily at first attempt.

High quality CompTIA 220-801 dumps pdf practice materials: https://drive.google.com/open?id=0B_7qiYkH83VRNjNMdThRWnZ5R3M

High quality CompTIA 220-901 dumps pdf practice materials: https://drive.google.com/open?id=0B_7qiYkH83VRVGVJcl9yNUZiWDA
220-801 dumps
QUESTION 1
A technician completing a server room build out encounters a bundle of un-terminated network cables that are not labeled. Which of the following tools would be the BEST to determine which devices the cables are run to?
A. Toner probe
B. Multimeter
C. Cable tester
D. Loopbackplug
Correct Answer: A

QUESTION 2
A smartphone user experiences difficulty removing the back cover of the device. Once finally removed, the battery appears to have swollen. The battery is still functional, but requires more frequent charging than it used to. Which of the following should the user do NEXT?
A. Remove the battery and let it cool for 24 hours
B. Fully discharge and then fully recharge the battery
C. Short the battery terminals with a paper clip
D. Replace the battery with a new one
Correct Answer: D

QUESTION 3
Which of the following cable connection types is an example of a mini DIN?
A. BNC
B. PS/2
C. RCA
D. DB9
Correct Answer: B

QUESTION 4
A technician is troubleshooting a desktop PC. When the power button is pressed, the fan momentarily spins and the PC does not boot. Which of the following components is MOST likely the problem?
A. CPU
B. CMOS battery
C. RAM
D. Power supply
Correct Answer: D

QUESTION 5
An example of built-in system diagnostics includes which of the following? 220-801 dumps
A. POST cards
B. Indicator lights
C. TPM
D. BIOS settings
Correct Answer: B

QUESTION 6
Which of the following cable types should be installed to minimize toxic fumes in the event of a fire?
A. Fiber
B. STP CAT6
C. Plenum
D. Coaxial
Correct Answer: C

QUESTION 7
Which of the following memory types is used exclusively in laptops?
A. DIMM
B. DDR3
C. RAMBUS
D. SODIMM
Correct Answer: D

QUESTION 8
Which of the following socket types is for an Intel CPU?
A. F
B. 940
C. AM3
D. 1156
Correct Answer: D

QUESTION 9
Which of the following cable types has extra shielding built into the cable to guard against EMI?
A. UTP
B. Multimode
C. STP
D. Single-mode
Correct Answer: C

QUESTION 10
A technician is helping set up a new networking closet and notices that the humidity level is low in the room. Which of the following should be installed FIRST before rack mounting equipment?
A. A dehumidifier
B. A fire suppression system
C. ESD strap
D. Grounding bars
Correct Answer: D

QUESTION 11
Which of the following devices is MOST likely to outperform a 15,000 rpm SAS hard drive in read speed? 220-801 dumps
A. Compact flash
B. SSD
C. Tape
D. SD
Correct Answer: B

QUESTION 12
Which of the following is an example of an APIPA address?
A. 4.2.2.2
B. 10.23.145 90
C. 169.254.44.157
D. 192.168.32.59
Correct Answer: C

QUESTION 13
A technician is building a custom gaming computer. Which of the following is the FASTEST memory the technician can use?
A. DDR2 CAS7
B. DDR3 CAS9
C. DDR3 CAS10
D. DDR3 CAS11
Correct Answer: B

QUESTION 14
Which of the following are steps to take before replacing or updating the memory in a laptop? (Select TWO).
A. Unplug the AC power adapter
B. Remove the keyboard and touchpad
C. Separate the screen from the base
D. Remove the battery
E. Remove all of the screws from the bottom of the case
Correct Answer: AD

QUESTION 15
An end user is designing a PC with a clear acrylic access panel to show off the insides. The user wants the inside to stay cool, but as dust free as possible. Which of the following would BEST meet this scenario?
A. Create a positive pressure air flow with unfiltered intakes and filtered exhausts
B. Create a positive pressure air flow with filtered intakes and unfiltered exhausts
C. Create a negative pressure air flow with unfiltered intakes and unfiltered exhausts
D. Create a negative pressure air flow with filtered exhausts and unfiltered exhausts
Correct Answer: B

QUESTION 16
A technician observes another technician trying to steal a company laptop. 220-801 dumps Which of the following should the first technician do NEXT?
A. Confront the technician stealing the laptop
B. Preserve the laptop for evidence
C. Report through proper channels
D. Document the incident
Correct Answer: C

QUESTION 17
Which of the following is a private class B IP address?
A. 10.0.15.1
B. 172.16.0.1
C. 172.33.1.1
D. 192.168.1.1
Correct Answer: B

QUESTION 18
A CAD/CAM user requires faster onscreen refresh rates. Which of the following slots allows for faster graphic performance?
A. AGP
B. AGP x8
C. PCIe
D. PCI
Correct Answer: C

QUESTION 19
Which of the following expansion cards would provide support for additional internal storage?
A. Video capture
B. Modem
C. USB port
D. RAID controller
Correct Answer: D

QUESTION 20
A consultant has been asked to install the brightest possible projector into an office conference room that has a lot of natural sunlight. Which of the following specifications would BEST meet the client\’s needs?
A. Highest possible resolution
B. High lumens
C. High contrast
D. HDMI 1.4 compatibility
Correct Answer: B

The best and most updated latest CompTIA A+ 220-801 dumps exam practice materials in PDF format free download from leads4pass. High quality CompTIA A+ https://www.leads4pass.com/220-801.html dumps pdf training resources which are the best for clearing 220-801 exam test, and to get certified by CompTIA A+, download one of the many PDF readers that are available for free.

Latest CompTIA A+ 220-801 dumps vce youtube: https://youtu.be/PXvcbMiJd3g

[New Cisco Exam Dumps] Cisco CCNA Data Center 200-155 Dumps PDF Files And VCE Youtube Demo Shared

admin January 3, 2018

Prepare for Cisco 200-155 exam test with best useful Cisco CCNA Data Center 200-155 dumps pdf files and vce youtube demo update free shared. Latest Cisco CCNA Data Center 200-155 dumps exam training materials in PDF format free download from leads4pass. “Introducing Cisco Data Center Technologies” is the name of Cisco CCNA Data Center https://www.leads4pass.com/200-155.html exam dumps which covers all the knowledge points of the real Cisco exam. Newest helpful Cisco CCNA Data Center 200-155 dumps exam questions and answers update free try, pass Cisco 200-155 exam test easily at the first time.

Best Cisco 200-155 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E

Best Cisco 200-150 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRNFFRMURQbmZ4T1U
200-155 dumps
QUESTION 1
Which statement about slow inter VLAN forwarding is true?
A. The VLAN is experiencing slowness in the point-to-point collisionless connection.
B. The VLANs are experiencing slowness because multiple devices are connected to the same hub.
C. The local VLAN is working normally, but traffic to the alternate VLAN is forwarded slower than expected.
D. The entire VLAN is experiencing slowness.
E. The VLANs are experiencing slowness due to a duplex mismatch.
Correct Answer: E

QUESTION 2
What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?
A. It avoids split-horizon issues with distance vector routing protocols.
B. IP addresses can be conserved if VLSM is not being used for subnetting.
C. A multipoint interface offers greater security compared to point-to-point subinterface configurations.
D. The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over pointto-point configurations.
Correct Answer: B

QUESTION 3
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)
A. source IP address
B. source MAC address
C. egress interface
D. ingress interface
E. destination IP address
F. IP next-hop
Correct Answer: ADE

QUESTION 4
What occurs on a Frame Relay network when the CIR is exceeded?
A. All TCP traffic is marked discard eligible.
B. All UDP traffic is marked discard eligible and a BECN is sent.
C. All TCP traffic is marked discard eligible and a BECN is sent.
D. All traffic exceeding the CIR is marked discard eligible.
Correct Answer: D

QUESTION 5
Which command is used to enable CHAP authentication, 200-155 dumps with PAP as the fallback method, on a serial interface?
A. Router(config-if)# ppp authentication chap fallback ppp
B. Router(config-if)# ppp authentication chap pap
C. Router(config-if)# authentication ppp chap fallback ppp
D. Router(config-if)# authentication ppp chap pap
Correct Answer: B

QUESTION 6
Which port state is introduced by Rapid-PVST?
A. learning
B. listening
C. discarding
D. forwarding
Correct Answer: C

QUESTION 7
The output of the show frame-relay pvc command shows andquot;PVC STATUS = INACTIVEandquot;. What does this mean?
A. The PVC is configured correctly and is operating normally, but no data packets have been detected for more than five minutes.
B. The PVC is configured correctly, is operating normally, and is no longer actively seeking the address of the remote router.
C. The PVC is configured correctly, is operating normally, and is waiting for interesting traffic to trigger a call to the remote router.
D. The PVC is configured correctly on the local switch, but there is a problem on the remote end of the PVC.
E. The PVC is not configured on the local switch.
Correct Answer: D

QUESTION 8
Which EIGRP for IPv6 command can you enter to view the link-local addresses of the neighbors of a device?
A. show ipv6 eigrp 20 interfaces
B. show ipv6 route eigrp
C. show ipv6 eigrp neighbors
D. show ip eigrp traffic
Correct Answer: C

QUESTION 9
Which two switch states are valid for 802.1w? (Choose two.)
A. listening
B. backup
C. disabled
D. learning
E. discarding
Correct Answer: DE

QUESTION 10
Which parameter would you tune to affect the selection of a static route as a backup, when a dynamic protocol is also being used?
A. hop count
B. administrative distance
C. link bandwidth
D. link delay
E. link cost
Correct Answer: B

QUESTION 11
A router has two Fast Ethernet interfaces and needs to connect to four VLANs in the local network. How can you accomplish this task, 200-155 dumps using the fewest physical interfaces and without decreasing network performance?
A. Use a hub to connect the four VLANS with a Fast Ethernet interface on the router.
B. Add a second router to handle the VLAN traffic.
C. Add two more Fast Ethernet interfaces.
D. Implement a router-on-a-stick configuration.
Correct Answer: D

QUESTION 12
Which statement about MPLS is true?
A. It operates in Layer 1.
B. It operates between Layer 2 and Layer 3.
C. It operates in Layer 3.
D. it operates in Layer 2.
Correct Answer: B

QUESTION 13
Which of the following correctly describe steps in the OSI data encapsulation process? (Choose two.)
A. The transport layer divides a data stream into segments and may add reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.
Correct Answer: AC

QUESTION 14
The command show frame-relay map gives the following output:
Serial 0 (up): ip 192.168.151.4 dlci 122, dynamic, broadcast, status defined, active
Which statements represent what is shown?(Choose three.)
A. 192.168.151.4 represents the IP address of the remote router
B. 192.168.151.4 represents the IP address of the local serial interface
C. DLCI 122 represents the interface of the remote serial interface
D. DLCI 122 represents the local number used to connect to the remote address
E. broadcast indicates that a dynamic routing protocol such as RIP v1 can send packets across this PVC
F. active indicates that the ARP process is working
Correct Answer: ADE

QUESTION 15
Which Cisco platform can verify ACLs?
A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller
C. Cisco APIC-EM
D. Cisco IOS-XE
Correct Answer: B

QUESTION 16
In an Ethernet network, under what two scenarios can devices transmit? (Choose two.)
A. when they receive a special token
B. when there is a carrier
C. when they detect no other devices are sending
D. when the medium is idle
E. when the server grants access
Correct Answer: CD

QUESTION 17
Which option describes what a switch does after it items that a host has connected to a switch port? 200-155 dumps
A. Flood the frame only on all of its trunk ports.
B. Create a MAC to port mapping entry in MAC table.
C. Flood the frame only on all of its access ports.
D. Discard the frame.
Correct Answer: C

QUESTION 18
A network interface port has collision detection and carrier sensing enabled on a shared twisted pair network. From this statement, what is known about the network interface port?
A. This is a 10 Mb/s switch port.
B. This is a 100 Mb/s switch port.
C. This is an Ethernet port operating at half duplex.
D. This is an Ethernet port operating at full duplex.
E. This is a port on a network interface card in a PC.
Correct Answer: C

QUESTION 19
An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.
Which two items can be configured during this setup process?
A. default port-channel mode
B. default port VSAN membership
C. default switch port interface state
D. default zone mode
E. default storage VDC
Correct Answer: CD

QUESTION 20
What are two drawbacks of implementing a link-state routing protocol? (Choose two.)
A. the sequencing and acknowledgment of link-state packets
B. the requirement for a hierarchical IP addressing scheme for optimal functionality
C. the high volume of link-state advertisements in a converged network
D. the high demand on router resources to run the link-state routing algorithm
E. the large size of the topology table listing all advertised routes in the converged network
Correct Answer: BD

High quality Cisco CCNA Data Center 200-155 dumps pdf practice materials and study guides free download from leads4pass. The best and most updated latest Cisco CCNA Data Center https://www.leads4pass.com/200-155.html dumps pdf training resources which are the best for clearing 200-155 exam test, and to get certified by Cisco CCNA Data Center. 100% success and guarantee to pass.

Latest Cisco CCNA Data Center 200-155 dumps vce youtube: https://youtu.be/MHDYkPVUMBQ

[New Citrix Exam Dumps] Best Useful Citrix 1Y0-A22 Dumps Exam Practice Files And Youtube Update

admin December 26, 2017

New Citrix 1Y0-A22 dumps exam questions and answers free download from leads4pass. Best useful Citrix 1Y0-A22 dumps pdf files and vce youtube demo update free shared. “Citrix XenApp 6.5 Advanced Administration” is the name of Citrix https://www.leads4pass.com/1y0-a22.html exam dumps which covers all the knowledge points of the real Citrix exam. Latest Citrix 1Y0-A22 dumps pdf training materials and study guides free update, pass Citrix 1Y0-A22 exam test easily at first try.

Useful latest Citrix 1Y0-A22 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRYmR4UXRyVEhlX0U

Useful latest Citrix 1Y0-A26 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRVTY2VzE4YnR4bUE
1Y0-A22 dumps
QUESTION 1
An administrator needs to validate the data store in a XenApp farm.
The administrator should use the DSCHECK command with the /CLEAN parameter after _______. (Choose the correct option to complete the sentence.)
A. restoring the data store
B. backing up the data store
C. restarting the XenApp server
D. restarting the IMA Service on the data collector
Correct Answer: B

QUESTION 2
Scenario: An administrator in a XenApp farm is in the process of replacing a couple of the failed XenApp servers in the farm. The administrator has been instructed to execute the DSCHECK command once the servers have been replaced.
What will be the outcome of executing the DSCHECK command?
A. Recover the local data store
B. Purge corrupt local host cache entries
C. Purge the data store of incorrect entries
D. Display information about servers in the farm
Correct Answer: C

QUESTION 3
Scenario: An administrator migrated the data store of a Citrix XenApp 6.5 server farm from Microsoft SQL Server Express on XenApp server XAS01 to a separate Microsoft SQL Server 2008 cluster.
The administrator tested the move, noted that the cluster is running well and found no errors. None of the XenApp 6.5 servers can connect to the new location of the data store.
In this scenario, when should the administrator use the DSCHECK command?
A. After restarting the data collector
B. After using the DSMAINT command
C. After running the QFARM command
D. After using the CHANGE CLIENT command
Correct Answer: B

QUESTION 4
When should an administrator use the DSCHECK command line utility?
A. To fix errors on server entries in the data store
B. To fix errors related to configuring Proxy Authentication
C. To fix errors in the local host cache on each XenApp 6.5 server
D. To generate a report of logon/logoff activity for a XenApp 6.5 server
Correct Answer: A

QUESTION 5
Scenario: An administrator has configured a XenApp Web site and customized the footer text of the site to reflect the required customer-specific hyperlinks. 1Y0-A22 dumps The administrator now plans to back up the site.
Which file must the administrator back up?
A. Default.ica
B. Web.config
C. Repair.SFO
D. WebInterface.conf
E. LoginMainFormFoot.inc
Correct Answer: D

QUESTION 6
After repairing a XenApp Web site, an administrator notices that the customized footer text is missing.
Which file must the administrator restore from backup?
A. Default.ica
B. Web.config
C. Repair.SFO
D. WebInterface.conf
E. LoginMainFormFoot.inc
Correct Answer: D

QUESTION 7
Scenario: An administrator used the Server Configuration Tool to install a Microsoft SQL Server Express data store database automatically as part of a XenApp 6.5 farm installation. The initial configuration consisted of a single zone and servers in a single physical location. The administrator added an equal number of servers and users to the farm at a second physical location over a WAN.
Which action would require the administrator to migrate the data store database from Microsoft SQL Server Express to Microsoft SQL Server?
A. Adding an additional zone to the farm
B. Replicating the data store to a second database server
C. Moving the data store from local storage to SAN storage
D. Adding the configuration logging database to the same SQL server
Correct Answer: B

QUESTION 8
Scenario: An administrator used the Server Configuration Tool to install a Microsoft SQL Server Express data store database automatically as part of a XenApp 6.5 farm installation. The initial configuration consisted of a single zone and servers in a single physical location. The administrator added an equal number of servers and users to the farm at a second physical location over a WAN.
Which action would require the administrator to migrate the data store database from Microsoft SQL Server Express to Microsoft SQL Server?
A. Adding an additional zone to the farm
B. Mirroring the SQL database to a second SQL server
C. Moving the database from local storage to SAN storage
D. Adding the configuration logging database to the same SQL server
Correct Answer: B

QUESTION 9
Scenario: An administrator used the Server Configuration Tool to install a Microsoft SQL Server Express data store database automatically as part of a XenApp 6.5 farm installation. The initial configuration consisted of a single zone and servers in a single physical location. The administrator added an equal number of servers and users to the farm at a second physical location over a WAN.
Which new requirement would require the administrator to migrate the data store database from Microsoft SQL Server Express to Microsoft SQL Server?
A. Implementing database mirroring
B. Adding an additional zone to the farm
C. Moving the database from local storage to SAN storage
D. Adding the configuration logging database to the same SQL server
Correct Answer: A

QUESTION 10
Scenario: A XenApp Administrator in an enterprise environment plans to use Access Gateway to secure ICA connections from the external network. The Access Gateway is in the DMZ using ICA proxy mode.
Which two locations for these components would be the most secure? (Choose two.)
A. Place the XML broker in the DMZ.
B. Place the Web Interface in the DMZ.
C. Place the XML broker in the internal network.
D. Place the Web Interface in the internal network.
Correct Answer: CD

QUESTION 11
Scenario: A XenApp Administrator in a small environment plans to use Access Gateway to secure ICA connections from an external network. 1Y0-A22 dumps The Access Gateway is in the DMZ in ICA proxy mode. The environment requires minimum configuration to secure connections from the Web Interface server to the XML broker server.
Where should the administrator place the Web Interface server and XML broker?
A. On one server and place the server in the DMZ
B. On separate servers and place the servers in the DMZ
C. On one server and place the server in the internal network
D. On separate servers and place the servers in the internal network
Correct Answer: C

QUESTION 12
In order for the Web Interface server to correctly work with the Access Gateway Enterprise Edition configuration in the attached exhibit,
1Y0-A22 dumps
the administrator must configure the authentication point at __________. (Choose the correct option to complete the sentence.)
A. LDAP
B. RADIUS
C. the Web Interface
D. the Access Gateway
Correct Answer: C

QUESTION 13
Which two methods can an administrator use to configure Web Interface in high availability mode? 1Y0-A22 dumps (Choose two.)
A. Windows Cluster services
B. NetScaler Load Balancing feature
C. Windows Load Balancing services
D. NetScaler Access Gateway feature
Correct Answer: BC

QUESTION 14
A XenApp Administrator plans to use Citrix NetScaler to load balance Web Interface servers.
Which persistence setting should the administrator choose to correctly configure high availability for Web Interface?
A. NOCE
B. DESTIP
C. SOURCEIP
D. COOKIEINSERT
Correct Answer: D

QUESTION 15
Scenario: A XenApp Administrator of a 100-server farm needs to apply Citrix and vendor hotfixes on a monthly basis, and a server restart is always required. The administrator needs to automate this process but does NOT have a third party tool available.
Which two tasks should the administrator complete to guarantee that updates will be applied successfully? (Choose two.)
A. Prohibit logons and notify users.
B. Restart the server and install hotfixes.
C. Apply application load evaluators and notify users.
D. Log off all users from servers and schedule a .EXE setup file installation.
Correct Answer: AB

QUESTION 16
Scenario: The Citrix Administrator of a large farm needs to perform a health check after a scheduled update window. The health check should alert the administrator when the server is unavailable to users.
Which action must the administrator take to perform a health check after a scheduled update window?
A. Use PowerShell SDK scripts to verify the applied updates.
B. Use MFCOM to check applied updates and enabled logons.
C. Use MFCOM scripts to verify enabled logons and open Citrix ports.
D. Use PowerShell SDK scripts to check enabled logons and open Citrix ports.
Correct Answer: D

QUESTION 17
Scenario: A new administrator has been asked to ensure that all servers meet the minimum required patching level. A test server has been used to confirm that all patches can be deployed to the production servers. Testing has identified that production servers are NOT at the same patch level.
Which action can the administrator take to identify which patches are required on each production server?
A. Use the Citrix Computer policy wizard.
B. Use the Citrix AppCenter History node.
C. Use the Citrix AppCenter Configuration Tools node.
D. Use the Prepare this server for imaging and provisioning task.
Correct Answer: C

QUESTION 18
Scenario: A XenApp Administrator needs to deploy a small MSI package across all XenApp servers. This package requires a restart which needs to be scheduled to ensure that all servers do NOT restart at once. 1Y0-A22 dumps
Which action must the administrator take to fulfill the requirement?
A. Set up Installation Manager.
B. Configure Health Monitoring and Recovery.
C. Create a maintenance policy in the AppCenter console.
D. Use the XenApp Server Role Manager to install Installation Manager.
Correct Answer: A

QUESTION 19
Which component should an administrator monitor to verify if the XenApp servers are accepting ICA connections?
A. ICA Listener
B. Logon Monitor
C. Citrix IMA Service
D. Citrix Streaming Service
Correct Answer: A

QUESTION 20
Scenario: Some users in remote offices complain that Citrix sessions are slow, and the network administrator has asked the Citrix Administrator to determine whether any data transmission errors are occurring for a group of sample users. In this environment, EdgeSight, Branch Repeater and Session Reliability are NOT used.
How can the Citrix Administrator determine the extent of data transmission errors based on the sample users?
A. Configure Multi-Stream for sample users.
B. Open the Citrix Connection Center for sample users.
C. Enable ICA round trip calculators for idle connections for sample users.
D. Change the active session limit to something other than Never in the ICA-TCP settings.
Correct Answer: B

The best and most updated Citrix 1Y0-A22 dumps exam practice materials in PDF format download to have a free try. High quality Citrix Popular Exams5 https://www.leads4pass.com/1y0-a22.html dumps pdf training resources which are the best for clearing 1Y0-A22 exam test, and to get certified by Citrix home Popular Exams5. 100% success and guarantee to pass.

High quality Citrix 1Y0-A22 dumps vce youtube: https://youtu.be/l47UGwEjKLA

[New CompTIA Exam Dumps] Latest CompTIA Linux+ LX0-101 Dumps Exam Training Resources And Youtube Demo

admin December 18, 2017

Latest CompTIA Linux+ LX0-101 dumps pdf training resources and vce youtube demo update free shared. “CompTIA Linux+ [Powered by LPI] Exam 1” is the name of CompTIA Linux+ https://www.leads4pass.com/lx0-101.html exam dumps which covers all the knowledge points of the real CompTIA exam. New CompTIA Linux+ LX0-101 dumps exam practice files download to have a free try from leads4pass.

The best and most updated useful CompTIA Linux+ LX0-101 dumps pdf training resources which are the best for clearing LX0-101 exam test, and to get certified by CompTIA Linux+. 100% success and guarantee to pass CompTIA LX0-101 exam test quickly and easily at first attempt.

High quality CompTIA LX0-101 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRZ3FjZ01MVnQ3Rjg

High quality CompTIA LX0-102 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRZ3hRVkZpZk5lN28
LX0-101 dumps
QUESTION 1
Which of the following directories contains additional information about installed packages?
A. /usr/share/documentation
B. /usr/local/share/documentation
C. /usr/local/doc
D. /usr/share/doc
E. /usr/packages/doc
Correct Answer: D

QUESTION 2
Which of the following commands will allow an administrator to adjust the number of mounts after which an existing filesystem will be checked by e2fsck?
A. debugfs
B. dumpe2fs
C. mode2fs
D. tune2fs
E. mke2fs
Correct Answer: D

QUESTION 3 CORRECT TEXT
In which directory must definition files be placed to add additional repositories to yum?
Correct Answer: /ETC/YUM.REPOS.D,/ETC/YUM.REPOS.D/,YUM.REPOS.D,YUM.REPOS.D/

QUESTION 4
An administrator is looking for an executable file foo. Which of the following commands would search for foo within directories set in the shell variable, PATH? LX0-101 dumps
A. locate
B. which
C. find
D. query
E. whereis
Correct Answer: B

QUESTION 5
Which of the following command lines would an administrator use to restrict the GNU find command to searching a particular number of subdirectories?
A. –max-dirs
B. -dirmax
C. -maxdepth
D. -s
E. -n
Correct Answer: C

QUESTION 6
The lspci command can display information about devices EXCEPT:
A. card bus speed (e.g. 66Mhz).
B. card IRQ settings.
C. card vendor identification.
D. card AGP rate (e.g. 1x, 2x, 4x).
E. card Ethernet MAC address.
Correct Answer: E

QUESTION 7
In compliance with the FHS, in which of the following places are man pages typically found?
A. /usr/share/man
B. /opt/man
C. /usr/doc/
D. /var/pkg/man
E. /usr/local/man
Correct Answer: A

QUESTION 8 CORRECT TEXT
The system configuration file named is commonly used to set the default runlevel. (Please provide the fill name with full path information).
Correct Answer: /ETC/INITTAB

QUESTION 9
In the vi editor, which of the following commands will delete the current line at the cursor and the 16 lines following it (17 lines total)? LX0-101 dumps
A. 17d
B. 17dd
C. 17x
D. d17d
E. 16d
Correct Answer: B

QUESTION 10
All of the following commands will update the Modify timestamp on the file /tmp/myfile.txt EXCEPT:
A. file /tmp/myfile.txt
B. echo “Hello” >/tmp/myfile.txt
C. sed -ie “s/1/2/” /tmp/myfile.txt
D. echo -n “Hello” >/tmp/myfile.txt
E. touch /tmp/myfile.txt
Correct Answer: A

QUESTION 11 CORRECT TEXT
What command with all options and/or parameters will send the signal USR1 to any executing process of program apache2?
Correct Answer: KILLALL-SSIGUSR1APACHE2,KILLALL-SUSR1APACHE2,KILLALLSIGUSR1APACHE2,KILLALL-USR1APACHE2

QUESTION 12
An administrator wishes to kill a process with a PID of 123. Which of the following commands will allow the process to “clean up” before exiting?
A. kill -1 123
B. kill -9 123
C. kill -15 123
D. kill -17 123
Correct Answer: C

QUESTION 13
An administrator has just added a CD-ROM drive (/dev/hdd) to a system and added it to the administrator’s fstab. Typically the administrator can use which of the following commands to mount media in that drive to /mnt/cdrom?
A. mount /dev/cdrom /mnt/cdrom
B. mount /dev/cdrom
C. mount -t cdrom /dev/cdrom /mnt/cdrom
D. mount /mnt/cdrom
E. automount /mnt/hdd /mnt/cdrom}
Correct Answer: D

QUESTION 14
To what environment variable will an administrator assign or append a value if the administrator needs to tell the dynamic linker to look in a build directory for some of a program’s shared libraries?
A. LD_LOAD_PATH
B. LD_LIB_PATH
C. LD_LIBRARY_PATH
D. LD_SHARE_PATH
E. LD_RUN_PATH
Correct Answer: C

QUESTION 15
Pressing the Ctrl-C combination on the keyboard while a command is executing in the foreground sends which of following signal codes?
A. 1 (SIGHUP)
B. 2 (SIGINT)
C. 3 (SIGQUIT)
D. 9 (SIGKILL)
E. 15 (SIGTERM)
Correct Answer: B

Useful latest CompTIA Linux+ https://www.leads4pass.com/lx0-101.html dumps pdf training materials and study guides free download from leads4pass. High quality CompTIA Linux+ LX0-101 dumps exam questions and answers free update, pass CompTIA LX0-101 exam test easily at first try.

High quality CompTIA Linux+ LX0-101 dumps vce youtube: https://youtu.be/NpGk33evqRs