200-301 dumps topic exam questions

CCNA 200-301 dumps

leads4pass CCNA 200-301 dumps updated, containing 1297 latest topic exam questions and answers, reviewed, corrected, and actually verified by the leads4pass Cisco team to meet the CCNA certification exam requirements!

Now! Download CCNA 200-301 dumps with PDF and VCE: https://www.leads4pass.com/200-301.html, practice completing CCNA 200-301 topic exam questions. 100% Guaranteed Success on Your CCNA 200-301 Exam!

Share part of the topic exam questions from leads4pass CCNA 200-301 dumps

FromNumber of exam questionsAssociated certificationLast updated
leads4pass15CCNA, CCNP EnterpriseCCNA 200-301 dumps
Topic Question 1:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 1

A network engineer is configuring a wireless LAN with Web Passthrough Layer 3 Web Policy. Which action must the engineer take to complete the configuration?

A. Set the Layer 2 Security to 802.1X.

B. Enable TKIP and CCMP256 WPA2 Encryption.

C. Enable the WPA Policy.

D. Set the Layer 2 Security to None.

Correct Answer: D

Navigate to WLAN > Edit > Security > Layer2, and select None for Layer 2 Security:

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116879-configure-wlc-00.html

Topic Question 2:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 2

What is the reason for poor performance on the network interface?

A. The interface is receiving excessive broadcast traffic.

B. The cable connection between the two devices is faulty.

C. The interface is operating at a different speed than the connected device.

D. The bandwidth setting of the interface is misconfigured

Correct Answer: B

Here we see a large number of input errors and CRC errors.

CCNA 200-301 dumps topic exam questions 2-1

Topic Question 3:

What is a function of a southbound API?

A. Use orchestration to provision a virtual server configuration from a web server

B. Automate configuration changes between a server and a switching fabric

C. Manage flow control between an SDN controller and a switching fabric

D. Facilitate the information exchange between an SDN controller and an application

Correct Answer: C

Topic Question 4:

What is represented by the word “R29” within this JSON schema?

CCNA 200-301 dumps topic exam questions 4

A. array

B. key

C. object

D. value

Correct Answer: D

Topic Question 5:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 5

What is the next-hop IP address for R2 so that PC2 reaches the application server via EIGRP?

A. 192.168.30.1

B. 10.10.10.6

C. 10.10.10.5

D. 192.168.20.1

Correct Answer: B

Topic Question 6:

Refer to the exhibit. What configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

CCNA 200-301 dumps topic exam questions 6

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A

Topic Question 7:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 7

Which command must enable a floating default route on router A?

A. ip route 0.0.0.0 0.0.0.0 192.168.1.2

B. ip default-gateway 192.168.2.1

C. ip route 0.0.0.0 0.0.0.0 192.168.1.2 10

D. ip route 0.0.0.0 0.0.0.0 192.168.2.1 10

Correct Answer: C

Topic Question 8:

Which value is the unique identifier that an access point uses to establish and maintain wireless connectivity to wireless network devices?

A. VLANID

B. SSID

C. RFID

D. WLANID

Correct Answer: B

The SSID is a unique identifier that wireless networking devices use to establish and maintain wireless connectivity. Multiple access points on a network or subnetwork may use the same SSIDs.

Topic Question 9:

Refer to the exhibit. How will the router handle a packet destined for 192.0.2.156?

CCNA 200-301 dumps topic exam questions 9

A. The router will forward the packet via either Serial0 or Serial1.

B. The router will return the packet to its source.

C. The router will forward the packet via Serial 2.

D. The router will drop the packet.

Correct Answer: C

Topic Question 10:

Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?

CCNA 200-301 dumps topic exam questions 10

A. This design will function as intended.

B. Spanning tree will need to be used.

C. The router will not accept the addressing scheme.

D. The connection between switches should be a trunk.

E. The router interfaces must be encapsulated with the 802.1Q protocol.

Correct Answer: C

Each interface on a router must be in a different network. If two interfaces are in the same network, the router will not accept it and show an error when the administrator assigns it.

Topic Question 11:

What are two characteristics of a small office/home office connection environment? (Choose two.)

A. It requires 10Gb ports on all uplinks.

B. It supports between 50 and 100 users.

C. It supports between 1 and 50 users.

D. It requires a core, distribution, and access layer architecture.

E. A router port connects to a broadband connection.

Correct Answer: CE

Topic Question 12:

Which of the following dynamic routing protocols are Distance Vector routing protocols?

A. IS-IS

B. EIGRP

C. OSPF

D. BGP

E. RIP

Correct Answer: BE

Topic Question 13:

With REST API, which standard HTTP header tells a server which media type is expected by the client?

A. Accept-Encoding: gzip. deflate

B. Accept-Patch: text/example; charset=utf-8

C. Content-Type: application/json; charset=utf-8

D. Accept: application/json

Correct Answer: D

Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server.

Topic Question 14:

What is the purpose of configuring different levels of syslog for different devices on the network?

A. to rate-limit messages for different seventy levels from each device

B. to set the severity of Syslog messages from each device

C. to identify the source from which each syslog message originated

D. to control the number of Syslog messages from different devices that are stored locally

Correct Answer: B

The purpose of configuring different levels of syslog for different devices on the network is to set the severity of Syslog messages from each device.

Topic Question 15:

DRAG DROP

Match the functions to the corresponding layers.

Select and Place:

CCNA 200-301 dumps topic exam questions 15

Correct Answer:

CCNA 200-301 dumps topic exam questions 15-1


leads4pass CCNA 200-301 dumps cover the complete CCNA certification topic exam questions! You can experience some of the latest CCNA 200-301 dumps topic exam questions through the online practice,
Help you experience the real scene in advance!

More importantly! Download CCNA 200-301 dumps with PDF and VCE: https://www.leads4pass.com/200-301.html, practice completing CCNA 200-301 topic exam questions. Helping you pass the CCNA 200-301 exam with ease!