Latest updates Cisco CCNP Wireless Troubleshooting Cisco Wireless Enterprise Networks (WITSHOOT) 300-370 exam questions and Answers!
Free sharing 300-370 pdf online download, online exam Practice test, easy to improve skills! Get the full 300-370 exam dumps: https://www.leads4pass.com/300-370.html (Total questions:101 Q&A).
Year-round updates! guarantee the first attempt to pass the exam!
[PDF] Free Cisco 300-370 pdf dumps download from Google Drive: https://drive.google.com/open?id=12Vvbl7aq-Yl_QIwueJekdSrHlX4CcRKm
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx
300-370 WITSHOOT – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/witshoot.html
Latest effective Cisco 300-370 Exam Practice Tests
QUESTION 1
A WLAN was installed at a high AP density. DTPC is lowering the transmit power of many APs too low.
Which change m the DTPC transmit power threshold must be made to allow APs to globally increase AP transmit power
by 3dBm?
A. from 70 dBm to 73 dBm
B. from -70 dBm to -73 dBm
C. from 70 dBm to 67 dBm
D. from -70 dBm to -67 dBm
Correct Answer: D
QUESTION 2
A Cisco WLC v7.0 is not seeing an AP join. Which starting prefix debug command can help determine a combination of
discovery/join and DHCP process status?
A. debug capwap events – from Cisco WLC
B. debug capwap events – from the AP
C. debug ip udp – from Cisco WLC
D. debug ip udp – from the AP
Correct Answer: D
QUESTION 3
An engineer is troubleshooting non-802.11 interference and observes the shown output. Which interference signature is
the most harmful to Wi-Fi? Refer to the exhibit.
A. cordless phone
B. microwave oven
C. 2 4 GHz wideband jammer
D. FHSS Bluetooth
E. analog video camera
Correct Answer: A
QUESTION 4
A company consists of two adjacent buildings, each with its own Cisco 5508 Wireless Controller with APs joined to the
controller in the building. The two controllers are configured identically except for interface IP addresses. Only one SSID
is
being used in both buildings. The clients in building A are not experiencing any connectivity issues, but (he clients in
building B report poor connections An engineer performs a site survey and finds co-channel interference, yet discovers
mac
Transmit Power Control was never performed on the APs and that Radio Resource Management is not functioning like it
does in building A Furthermore, the controllers are in the same RF group and controller A is elected RF leader.
Which action will improve client connections in building B?
A. Ensure WMM is enabled on the SSID
B. Manually select controller B as RF group leader.
C. Configure controller B to be in a separate RF group.
D. Doable the low data rates on the a radio and the b/g radio in building B.
Correct Answer: C
QUESTION 5
Which visual cue accurately describes a characteristic of the zone of impact displayed in Cisco Prime Infrastructure?
A. The closer the cirlce is to blue, the more localized the impact is.
B. The smaller the circle, the more localized the impact is.
C. The larger the circle, the more severe the impact is.
D. The more translucent the circle is, the more localized the impact is.
Correct Answer: B
QUESTION 6
A VoWLAN has been deployed at a customer site. and users report that audio is choppy in some areas The exhibit
captures a voice exchange between one phone that is associated to the AP at the end of the corridor (172.31 255 101)
and
another phone that is positioned in a conference room nearby. Which action enhances the voice application quality of
experience?
Refer to the exhibit.
A. Change the basic rate configuration on the WLC to include 54 Mbps.
B. Change the WLAN QoS profile to platinum.
C. Decrease the AP power level.
D. Disable higher data rates on the controller.
Correct Answer: A
QUESTION 7
The AP is unable to join the controller. What is the cause of this error? Refer to the exhibit.
A. The controller code version is lower than the code of the AP attempting to join.
B. AP code is not the same as the controller and must download firmware.
C. AP model % not compatible with the controller code version.
D. The AP is riot conjured in the controller auth-list of acceptable APs.
Correct Answer: C
QUESTION 8
Refer to the exhibit.
A client reports being unable to log into the wireless network According to the output, which network information should
be verified?
A. the Failed Attempts log on the authentication server
B. that the AP has IP connectivity to the authentication server
C. that the user has an account on the authentication server
D. that the authentication and accounting configuration are correct
Correct Answer: B
QUESTION 9
You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access
the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to
access the standby unit? (Choose two.)
A. Via SSH to the Redundancy Management Interface.
B. Via Service Port Interface.
C. Via SSH to the Management Interface.
D. Via console connection.
Correct Answer: CD
QUESTION 10
An engineer is troubleshooting AP join issues on a wireless infrastructure. While gathering debugs, the engineer notices
that one of the commands may generate an excessive an excessive amount of data on the console. Which command
causes this to occur?
A. debug capwap detail enable
B. debug capwap errors enable
C. debug capwap info enable
D. debug capwap events enable
E. debug capwap packet enable
F. debug capwap payload enable
Correct Answer: B
QUESTION 11
Which two statements about the WLAN are true? (Choose two)
Refer to the exhibit. 
A. The client has a 5 GHz connection.
B. The client has authenticated.
C. The client is 802.11n capable.
D. The Cisco device is a 3600 series AP.
E. 802 11b data rates are disabled in this WLAN
Correct Answer: CE
QUESTION 12
Employees upgraded company issued OS devices. Which are configured to authenticate to the network using WPA2-
Eniefpnse 802 lx with LEAP As a result, the devices are no longer able to authenticate. Which action must the engineer
do
10 resolve the issue?
Refer to the exhibit.
A. Redeploy the existing configuration profile.
B. Change LEAP certificate on the ACS server.
C. Reset the network settings on the devices.
D. Rejoin the enterprise network manually.
E. Deploy a new configuration profile with LEAP enabled
Correct Answer: B
QUESTION 13
An engineer must open a support case with Cisco TAC. Which two commands verify the model and serial number of a
controller?(Choose two)
A. show sysinfo
B. show udi
C. show inventory
D. show boot
E. show tech-support
Correct Answer: AB
QUESTION 14
A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which
action must you take to resolve authentication?
A. Verify that the Validate server certificate on the client is disabled.
B. Verify that the client certificates are from the proper CA and server certificate.
C. Verify that the client server certificate has the proper Windows OlDs.
D. Verify that the user account is the same in the client certificate.
E. Verify that the user is using the same password that is on the server
Correct Answer: B
QUESTION 15
An engineer is using various techniques to discover and isolate rogues on the network. For which technique must the
engineer consider legal ramifications?
A. rogue AP containment
B. RF detection
C. switch port tracing
D. wire detection
E. Cisco Prime Infrastructure location services
Correct Answer: A
QUESTION 16
A WLC receives a coverage hole detection alert from an AP. What two conditions must occur for the controller to
dynamically mitigate the situation? (Choose two.)
A. The AP serving the troubled client must currently have a power level 2 or lower.
B. The client must be able to dynamically raise its power level to match the new AP power.
C. The AP must be RF visible to additional APs on the other side of the coverage hole for calibration.
D. The client must have WMM-PS disabled to allow for the increased power usage.
E. The AP serving the troubled client must currently have a power level higher than 2.
Correct Answer: AB
QUESTION 17
A user reports being unable to connect to a server with a certain program while connected to wireless. Which
troubleshooting methodology can be used to begin the troubleshooting process?
A. top-down
B. shoot from the hip
C. follow the path
D. bottom-up
E. divide and conquer
Correct Answer: A
QUESTION 18
Which statement about the join process of the access point is true? Refer to the exhibit.
A. The AP failed to join because the self-signed certificate of the AP was not correct on the controller.
B. The time on the controller is outside of the certificates validity time interval so the join phase failed.
C. The AP moved from this controller to its primary controller.
D. The AP successfully joined the controller.
Correct Answer: B
QUESTION 19
An engineer is troubleshooting access point placement issues and suspects that poor placement is causing connectivity
issues When running the show client detail command, the engineer notices this output Which option indicates
poor access point placement?
Refer to the exhibit.
A. excessive number of bytes sent compared to bytes received
B. high signal-to-noise ratio
C. excessive number of data retries
D. low ratio signal strength indicator
E. duplicate received packets
F. poor statistics for the last 90 seconds
Correct Answer: CD
QUESTION 20
Which three steps would a network engineer use to troubleshoot an AP join problem? (Choose three.)
A. Validate the STP configuration.Â
B. Verify the ping AP from the controller.
C. Verify the ping AP from the client.
D. Verify that the AP is getting an address from the DHCP server.
E. I Validate the SNMP configuration.
F. Verify the authentication configuration parameters.
Correct Answer: ABF
This is the latest update released by the Cisco CCNP Wireless Troubleshooting Cisco Wireless Enterprise Networks (WITSHOOT) 300-370 exam questions and answers,and we share 20 exam questions and answers for free to help you improve your skills!You can download 300-370 pdf or watch the 300-370 YouTube video tutorial online! Get the full 300-370 exam dumps: https://www.leads4pass.com/300-370.html (Total questions:101 Q&A). Help you pass the exam quickly!
[PDF] Free Cisco 300-370 pdf dumps download from Google Drive: https://drive.google.com/open?id=12Vvbl7aq-Yl_QIwueJekdSrHlX4CcRKm
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx
leads4pass Promo Code 12% Off
We share more practical and effective exam dumps
(Cisco,Microsoft,Oracle,Citrix,Comptia…) The latest comptia linux lx0-101 exam dumps help you improve your skills